Open your router admin panel (Belkin, Edimax, Bell)
http://192.168.2.1 Go
Username admin
Password (varies)

Older Belkin routers: blank password. Edimax: often admin / 1234. Bell Home Hub and Speedport: password on the label.

Routers and gateways that use 192.168.2.1

  • Belkin — many older Belkin routers used 192.168.2.1 and also answered on http://router.
  • Edimax — routers and some access points.
  • Bell Canada Home Hub — Bell's gateways in Canada use 192.168.2.1, with the admin password on the label.
  • Deutsche Telekom Speedport — German ISP routers, also reachable at speedport.ip.
  • SMC — some older SMC routers and modems.
  • Any router behind another router — a common choice, made automatically by some brands or by hand, to keep the second network separate from the first.

How to log in to 192.168.2.1

  1. Connect to the right device. If you have two routers, join the Wi-Fi of the one you want to configure, or plug into its LAN port.
  2. Type 192.168.2.1 in the browser address bar, not the search box.
  3. Sign in with the label password, your own password, or the brand default listed above.
  4. Change the default password if the router still uses one, and confirm Wi-Fi security is set to WPA2 or WPA3.

If the page doesn't load, check your device's default gateway (ipconfig on Windows, Wi-Fi details on a phone). If it shows 192.168.1.1 or 10.0.0.1, you are connected to the ISP gateway, not to the second router. The general router login guide and can't access your router cover the remaining checks.

Two routers: router mode vs access point mode

Many US households end up with two routers: the ISP's gateway (a modem/router combo from Xfinity, Spectrum, AT&T, Verizon or Cox) plus their own router or mesh system for better Wi-Fi. How you connect them decides whether you get double NAT.

Option A: your router in access point mode (simplest)

Your router stops routing and only provides Wi-Fi. The ISP gateway keeps handing out addresses.

  1. On your router, find the operating mode setting (often under Advanced, Operation Mode or System) and select Access Point. The menu name varies by brand.
  2. Connect your router to a LAN port on the ISP gateway with an Ethernet cable. Some brands want the router's WAN port used in AP mode, others a LAN port; follow the router's instructions.
  3. Once in AP mode, your router gets an address from the gateway, so 192.168.2.1 will no longer reach it. Use the brand's app or find its new address in the gateway's device list.
  4. Optionally turn off the gateway's own Wi-Fi so devices don't bounce between two networks.

Option B: the ISP gateway in bridge mode

The gateway stops routing and passes the public IP to your router, which does everything. Xfinity and Cox gateways commonly offer a bridge mode; AT&T offers IP Passthrough instead. Spectrum usually supplies a separate modem and router, so you can connect your own router to the modem in place of Spectrum's. Bridge mode usually disables the gateway's Wi-Fi and some ISP features, so check your provider's guidance first.

Option C: keep both in router mode

This works for browsing and streaming, and some people want it to isolate a network. Expect double NAT: set port forwarding on both routers, and know that game consoles may show a strict NAT type. See port forwarding and CGNAT for related issues.

Other router addresses

Frequently asked questions

Which routers use 192.168.2.1 by default?

The best-known examples are older Belkin routers, Edimax routers, Bell Canada Home Hub gateways, Deutsche Telekom Speedport routers and some older SMC units. It also appears whenever a router is connected behind another router that already uses 192.168.1.x or 192.168.0.x: some routers automatically move themselves to 192.168.2.1 to avoid a conflict, and many people choose that range manually for the same reason.

What is the default password for 192.168.2.1?

It depends on the device. Many older Belkin routers had no admin password by default (leave the field blank). Edimax routers have commonly used admin / 1234. Bell Home Hub and Telekom Speedport gateways use a device-specific password printed on the label. Newer routers of every brand increasingly ask you to create a password during setup. When in doubt, the label on the device is the most reliable source.

I have two routers and one answers on 192.168.2.1. Is that normal?

Yes. When you connect a second router's WAN (internet) port to your ISP gateway and leave it in router mode, it creates its own separate network. If the gateway already uses 192.168.1.x or 192.168.0.x, the second router often uses 192.168.2.x so the two do not overlap. Everything works for normal browsing, but you now have double NAT, which can cause trouble with gaming, port forwarding and some smart-home devices.

What is double NAT and how do I fix it?

Double NAT means your traffic passes through two routers that both translate addresses. Consoles may report a strict or moderate NAT type, port forwarding has to be set on both devices, and UPnP may not work reliably. Fix it by using only one router: either put your own router in access point mode (the ISP gateway keeps routing), or put the ISP gateway in bridge mode or, on AT&T, IP Passthrough (your own router does the routing).